The operator is used to hold the forging blank. It is suitable for hydraulic press or forging hammer to complete the main actions of feeding, rotating, turning and so on. Forging operators help to improve working conditions and increase production rate. According to the needs, the operator can also be used for charging and discharging, and can successfully realize remote sensing and linkage with the host. The structure of the manipulator is divided into rail and trackless, and its transmission modes are mechanical, hydraulic and hybrid. In addition, there are special operators for some auxiliary processes, such as loading and reclaiming operators and tool operators. In order to operate the machine properly, sometimes it is also equipped with a rotary table for forging stock dropping, so as to facilitate the turning of forging stock. In die forging and large stamping, manipulator has been widely used day by day. Such manipulator is actually a semi-automatic forging operator.
Unique technology of operator
1. Use full hydraulic transmission, high integrated valve block and large flow diameter as appropriate, so as to reduce system pressure deficit;
2. The sealing performance is high, and the imported sealing elements are used as appropriate;
3. The oil temperature is well controlled, and the ingenious mind has a special oil way preset, which really makes the hydraulic system in the best position, even if it works under long-term and heavy load conditions, it can also be easily and adequately served;
4. The combination of cycloid gear motor and involute speed reducing machine is used in the motion system, which is suitable for the motion system.
The special clamping mechanism is equipped with accumulator pressure to make the clamping strong and stable;
5. The three-stage linkage causes the jaw to rise and fall in parallel, the clamp rod to tilt, rotate 360 degrees, and rotate freely and flexibly in the three-dimensional space;
6. The power input of the whole machine is 70% more energy-saving than that of similar operators;
7. The manipulator has good-looking shape, compact and close structure, and very flexible movement. It can perform extremely well the actions that can not be completed by the huge operator, so that the operator can experience the integration of human and machine;
8. The sense of free will fully shows the fundamental significance of the transformation from manipulator to manipulator;
9. It is equipped with industrial semi-automatic control input port, which provides convenient conditions for your facility upgrading as early as possible, so that its grade is the first in the same type of machine.
